Introduction
The FT68200A/AL/E series of high power programmable DC electronic loads is designed for high reliability and high power density, which is twice the power density of traditional loads.
FT68200A/AL/E series has 150V, 600V, 1200V three voltage ranges, single power range from 4kW to 60kW, a single current up to 2400A. Its wider working range and extremely fast dynamic frequency effectively increase the test capability and application range. The whole series of products have strong overload capacity, and the instantaneous over-power pulling can reach 2 times the rated power, which can effectively reduce the test cost.
FT68200A/AL/E has LAN, RS232, RS485, CAN, GPIB, USB and other communication interfaces as well as analog interfaces. It supports both SCPI and ModBus communication protocols, which provides great convenience for system integration applications.
Parameters
Single power: 4kW ~ 60kW, the maximum power can be extended
to 600kW through the master/slave parallel;
Power density 6kW/3U;
Voltage range: 150V, 600V, 1200V;
Current range :100A/kW(150V), 70A/kW(600V), 40A/kW(1200V);
High precision, voltage accuracy is (0.025%+0.025%F.S.);
The current accuracy is (0.05%+0.05%F.S.);
Multiple working modes: CC, CV, CR, CP, CRD, CPD, CV+CC, CR+CC, CP+CC operation mode;
Programming speed 50kHz, sampling speed 500kHz;
30kHz dynamic scanning function;
The remote data transmission rate can reach 1kHz, which can greatly improve the data acquisition ability of the communication interface;
Instantaneous overpower with load function, instantaneous overload capacity more than twice the rated power;
OCP, OPP, LED simulation, load effect, battery internal resistance, battery discharge test function;
Time measurement, (Vpk+/-) measurement function;
Automatic test function, sine wave band load function, sequence function;
Comprehensive protection functions: over voltage, over current, over temperature, current limit, power limit, input reverse connection, power off memory, etc;
External analog programming input and current monitoring output with high voltage isolation capability;
TFT color LCD screen, English and Chinese menu interface;
Equipped with various communication interfaces: RS232, RS485,
LAN, USB, GPIB (optional), CAN (optional);
Supports SCPI and ModBus communication protocols.
Application
Power battery, lead-acid battery, fuel cell discharge test;
BMS and battery protection device testing;
Dc charging pile, charging module, vehicle charger, A/D power
converter and other power electronic power device testing;
Test high-power switching power supply, UPS power supply,
communication power supply, server power supply;
Virtual load testing of solar arrays and industrial motorsl.
